German Management & Engineering

Air Bag Inflation Tools / Adapter

The MEGA FLOW inflation series

 

Fast and simple, that are the two words to describe this new inflation tool. And it is easy and save to operate.

 

  • Press the handle to open the fork and apply it to the MegaFlow valve.

  • Release the handle when the inflator is on the valve to open it. You can hold the whole bag easy up with this inflator.
  •  
  • Open the hand slide valve ( blue ) on the inflators end to start inflating. The bag will inflate very fast.

  • When the bag start building up pressure, the over flow air stream will come out of the top opening of the inflator.

  • To built up more pressure in the bag, simply close the top opening with your hand for some seconds.

  • When the bag have reached your desired filling presure, press the inflator handle again and the MegaFlow valve will close automatically.

  • Finally remove the inflator from the valve and close the blue hand slide valve.

 

The MEGA FLOW inflation tools will be delivered in a small box with two air hose tips ( Euro / USA standard ).

 

One shipping carton contain 12 inflator boxes ( MOQ ).

45 Shipping cartons can be packed on one pallet.

This special tool is designed for the MEGA FLOW valve which is standard on all OEMSERV dunnage air bags.

 

This fully proved system, that eliminated operator error, can fill your dunnage air bag 40 to 50% faster than any other compressed air filling system !

 

The special designed venturi MEGA FLOW inflater leads the air stream in a special chamber and create a vacuum to suck additional outside air into the bag.

 

Inflating of dunnage air bags has never been easier and faster than with our new fast filling MEGA FLOW inflation tools.

 

i-5055 Mega Flow BASIC

fast filling inflation tool with firm nylon body

i-5060 Mega Flow ADVANCED fast filling inflation tool with firm Aluminium body With Electronic Pressure gauge.

i-5056 Mega Flow BASIC

fast filling inflation tool with firm nylon body and enforced aluminium parts on valve connector and air intake.

New

Air hose adapter for MegaFlow valves

Adapter for the MegaFlow valve which fits any 32mm ( 1 1/4 inch )
air tube to connect any battery-operated air blower.

The standard inflation series

This is our classic filling tool for PP woven and Paper air bags. The special design of the valve adapter can easy be clipped on the air bags valve; the handle helps to hold the bag in position.

 

The valve adapter comes in two types, one with a flexible rubber tube ( 40cm ) and one with a fixed steel pipe (20cm)

 

Any standard air pressure system can be connected to this inflater. An optional manometer shows the exact filling pressure.

 

The OEMSERV valve adapter is the most simple, but in the same time the most handy one in the market.

 

Air tube version:

i-800  Air Bag Inflation tool for SV and EV valves

i-900  Air Bag Inflation tool with manometer for SV and EV valves

 

Short pipe version:

i-805  Air Bag Inflation tool for SV and EV valves

i-905  Air Bag Inflation tool with manometer for SV and EV valves